MID166 Volvo PMS Fault Codes | Truckmanualshub.com (2024)

Deciphering of Diagnostic Trouble Codes for MID166 Volvo Tire Pressure Monitoring System

See also:

  • MID163 ICU Volvo Immobilizer Control Unit Fault Codes
  • MID150 ECS Volvo air suspension control unit fault codes

MID 166 SID 231

Parameter

SAE J1939 data feed

Malfunction

FMI 2There are no messages in the data channel.Breakage or partial damage to the data channel wiring.Contacts in the data channel connectors are damaged or oxidized.There may be a violation in the instrument panel software.

FMI 9Data from MID144 car control unit or MID136 braking system control unit is missing or incorrect.There may be a violation in the instrument panel software.First check the trouble codes in blocks MID144 and MID136.

MID 166 SID 253

Parameter

Gauge EEPROM Memory

Malfunction

FMI 2The tire pressure monitoring system control unit is not programmed or an error has occurred during the programming process.Reprogram the control unit.

FMI 13The control unit is not fully calibrated.One or more tire pressure sensors are not programmed in the control unit.

FMI 14The selected wheel or selected axis is not supported by the control unit.

MID 166 PSID 1

Parameter

Tire pressure sensors 1

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 2

Parameter

Tire pressure sensors 2

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 3

Parameter

Tire pressure sensors 3

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

See Also
3 Causes Of Volvo SDP Malfunction - Infinity Car Tips

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 4

Parameter

Tire pressure sensors 4

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 5

Parameter

Tire pressure sensors 5

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 6

Parameter

Tire pressure sensors 6

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 7

Parameter

Tire pressure sensors 7

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 8

Parameter

Tire pressure sensors 8

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 9

Parameter

Tire pressure sensors 9

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 10

Parameter

Tire pressure sensors 10

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 11

Parameter

Tire pressure sensors 11

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 12

Parameter

Tire pressure sensors 12

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 13

Parameter

Tire pressure sensors 13

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 14

Parameter

Tire pressure sensors 14

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 15

Parameter

Tire pressure sensors 15

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID 166 PSID 16

Parameter

Tire pressure sensors 16

Malfunction

FMI 0Tire pressure too high.

FMI 1Tire pressure too low.

FMI 9No information is received from the pressure sensorfor64 minutes while the vehicle is stationary.

FMI 10Air leakage from the tire.

FMI 12The tire pressure sensor is defective or missing.

MID166 Volvo PMS Fault Codes | Truckmanualshub.com (2024)

FAQs

What is the code mid 136? ›

The MID 136 code is due to an ABS Electronic Control Unit (ECU) threshold setting.

Explore More ›
How to fix p008a00 volvo? ›

The code P008A is logged once the powertrain control module (PCM) senses that the fuel pressure is too low within the low fuel system. Low fuel volume or insufficient flow may also trigger this code. Replacing the fuel filter or the fuel pump will resolve the problem in most cases.

Tell Me More ›
What is an ACM in a Volvo truck? ›

This module controls the operation of the emission system. The Aftertreatment Control Module (ACM) and Engine Control Module (ECM) are in direct communication to make sure the system is in operational mode.

Keep Reading ›
What is EMS on a Volvo truck? ›

EMS stands for Engine Management System, consisting of a wide range of electronic components such as sensors, relays, actuators, and an engine control unit. Go back to Volvo Fault Codes.

Learn More ›
What is a mid 128 fault code? ›

The MID 128 generally refers to the fuel system and in this case the complete error code specifically refers to a (common) rail system low pressure. Most of these MID 128 problems stem from lack of fuel supply or low pressure/volume of fuel supply. The cause is generally clogged fuel filters or fuel lines.

Read On ›
What is the abnormal update rate? ›

Abnormal Update Rate: Any failure detected when receipt of data via the data link or as input from a smart actuator or smart sensor is not at the update rate expected or required by the ECM (outside Region c of the signal range definition).

View Details ›
Does ECM control fuel pressure? ›

The fuel rail pressure sensor (FRPS) is a key component on any direct injection engine. It is responsible for signalling the correct rail values to the vehicles engine control module (ECM) to maintain pressure for a given operating condition.

Keep Reading ›
What is the code p00ba00 on a Volvo? ›

The engine control module (PCM) uses pressure sensors to determine the pressure in the fuel system. If the pressure drops too low, the PCM will set code P00BA. If the ECM detects a low fuel pressure condition and/or insufficient flow, it's important to be aware of local fuel conditions.

Get More Info Here ›
What is the desired fuel pressure? ›

Required fuel pressure can vary depending on your vehicle's engine and fuel system. Carbureted engines may require as little as 28 kPa (4 PSI), while modern multipoint fuel injected high-performance engines can require as much as 414 kPa (60 PSI).

Explore More ›
What does ECU mean on Volvo truck? ›

If you own a Volvo, you know how important it is to keep it running smoothly. One of the key components of any car is the Engine Control Unit (ECU). This computer system manages the engine's performance, ensuring that it runs smoothly and efficiently.

Explore More ›

What is ECM in Volvo? ›

The ECU, often referred to as the engine control module (ECM), is essentially the brain of your Volvo's engine. It constantly monitors and adjusts various parameters, such as fuel injection, ignition timing, air-fuel mixture, and more, to ensure smooth operation.

Read More ›
What is the SCR system on a Volvo truck? ›

DRIVING NEAR-ZERO EMISSIONS

Volvo's Selective Catalytic Reduction (SCR) system is a superior solution to the EPA's emissions standards, not to mention a fuel- and cost-saving innovation for your fleet.

Explore More ›
What is immobilizer system in Volvo truck? ›

The immobilizer secures the truck using a chip with an electronic code integrated in the key. Whenever the ignition is switched on, the immobilizer runs a check in order to unlock the engine.

Learn More ›
What is the difference between EMS and ECU? ›

Emu is like the main part of the electronic control system in a car. It acts like a brain in a human body or a CPU in a computer. Ems consists of all the sensors actuators etc which help in giving the necessary input to the ecu. Ecu processes this information and initiates the action to be taken.

View More ›
What is the abs code 136 on a Freightliner? ›

MID 136 just identifies that you have a abs fault. There should be 2 more sets of numbers to go with this code. A sid or pid number and a fmi or fail number. You should be able to get the rest of the code using your mode/reset button on your dash display if you have one.

See Details ›
What is the code 130 on a Freightliner? ›

ECU 130 is for transmission. The transmission TCU has a fault code logged. Once you retrieve the full fault code information you can begin troubleshooting that fault code or codes individually.

Get More Info ›
What is the code sid146? ›

This fault code is for #1 egr valve. Typically this fault indicates a bad valve itself. I would inspect the wiring near the valve where it comes out of the guide for any defects.

Explore More ›
What is the code Sid 254 on a Freightliner? ›

On your sid 254 fault. This is an issue with the ecm. This can be a power supply issue, software, or an actual ecm issue. This can cause low power, or a no start issue.

Know More ›

References

Top Articles
9 Spiked Hot Chocolate Recipes
40 Salmon Recipes to Add to Your Rotation
Steinhafels Furniture hiring Interior Designer in Greenfield, WI | LinkedIn
Steinhafels Furniture hiring Retail Sales Associate in Kenosha, WI | LinkedIn
Latest Posts
Real Food Eggnog Recipe {dairy-free option, Paleo, Low Carb}
The 25 Most Popular Recipes of 2012
Article information

Author: Laurine Ryan

Last Updated:

Views: 5893

Rating: 4.7 / 5 (77 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Laurine Ryan

Birthday: 1994-12-23

Address: Suite 751 871 Lissette Throughway, West Kittie, NH 41603

Phone: +2366831109631

Job: Sales Producer

Hobby: Creative writing, Motor sports, Do it yourself, Skateboarding, Coffee roasting, Calligraphy, Stand-up comedy

Introduction: My name is Laurine Ryan, I am a adorable, fair, graceful, spotless, gorgeous, homely, cooperative person who loves writing and wants to share my knowledge and understanding with you.